CW-327

A/D CONVERTER

We have expanded our CW-300 series for test bench technology with the CW-327, a module designed to measure 16 analog voltages. It is possible to measure voltages from 0 to max. 60 VDC per channel with 16 bit resolution. Device settings such as baud rate of the CAN bus, output transfer rate, voltage ranges and transmission modes can easily be configured via CAN messages. All 16 inputs are sampled synchronously and issued on the CAN bus.

Consequently, the CW-327 is particularly suited for performing component tests and simulations on HiL test benches. Furthermore, it is practical to deploy this model in all other situations in which voltages are to be measured in close proximity to the test specimen. The close proximity to the test specimen makes it possible to reduce cabling costs and susceptibility to EMI noise.

In conjunction with the bus technology modules CW-101 and CW-102 it is possible to transfer measurement data via USB or Ethernet to a PC on the one hand, and to alter the configuration of the module on the other. A software API written in C/C++ and C# facilitates incorporating the module in proprietary programs.

PERFORMANCE CHARACTERISTICS

16 single-ended inputs or 8 differential inputs
Input voltages configurable between 0-60 VDC
16 bit resolution per channel
Analog anti-aliasing filter
Measurement data output via CAN bus
Synchronous sampling of all channels
Overvoltage, polarity reversal and short-circuit protection
Easy to extend and scale channels

Technical Data

VOLTAGE INPUTS

Number	16 channel single-ended or 8 channels differential
Voltage ranges	0 VDC to 60 VDC (max.) Further measurement ranges hardware configurable
Sampling rate	125 kHz
Resolution	16 bit per channel
Deviation max.	0.2 % of the measuring range end value
Output rate	500 Hz (default), max. 1 kHz via CAN-Bus configurable, Higher output rates on request

CAN-INTERFACE

Number	1
Type	ISO 11898-2 (highspeed) CAN-protocol version 2.0 A and 2.0 B, supports SAE J1939 (29-bit indentifier)
Data rate	500 kbit/s, on request: 50, 100, 125, 250, 500, 800 and 1000 kbit/s
Termination	120 Ohm, optional activation via jumper

Power Supply

Supply voltage	7 VDC to 30 VDC
Current consumption	100 mA at 12 VDC

Environmental conditions

Temperature range operation	-20 °C to +65 °C
Temperature range storage	-20 °C to +85 °C
Relative humidity	35 % to 85 % non-condensing

General information

Housing	45 mm-DIN-top-hat rail housing
Dimensions	100 mm x 125 mm x 55 mm
Weigth	180 g

Download

Datasheet CW-327

Download (PDF)

Back to the overview | CW-300 Series