The CW-140 “Interface for CAN and LAN” is a bus interface for different automotive bus systems. The basic version provides two CAN buses and two LIN buses as well as two channels with digital-analog converters.
The integrated touchscreen display facilitates intuitive operation. Five discrete buttons make it easier to operate in particularly harsh ambient conditions. The voltage supply is designed for use in automotive environments.
It is possible to extend the software without any difficulty via the USB interface in conjunction with a standard PC. That facilitates customer-specific modifications and extensions to the software at any time.
With the aid of add-on modules it is also possible to extend the CW-140 to support additional bus systems as well as signal measurement and signal generation applications.
| Number: | 2 |
| Type: | ISO 11898-2 (Highspeed) CAN-protocol version 2.0 A and 2.0 B, supports SAE J1939 (29-bit identifier) |
| Data rate: | Highspeed up to 1000 kbit/s, configurable |
| Termination: | 120 Ω resistor, optional |
| Connector: | LEMO EPG.0B.304 |
| Number: | 2, master-/slave mode configurable |
| Type: | LIN specification 2.0 or 2.1 |
| Data rate: | Up to 20 kbit/s |
| Connector: | LEMO EPG.0B.304 |
| Number: | 1 |
| Type: | USB 2.0 |
| Data rate: | Up to 100 Mbit/s |
| Connector: | Mini USB-socket, type B |
| Number: | 2 |
| Output level: | 0 VDC to 10 VDC |
| Resolution: | 12 bit |
| Connector: | LEMO EPG.0B.303 |
| Temperature range operation: | 0 °C to +70 °C |
| Temperature range storage: | -20 °C to +85 °C |
| Relative humidity: | 35 % to 85 %, non-condensing |
| Protection class: | IP 40 |
| Housing: | Rugged aluminum-housing |
| Dimensions: | LxWxH: 143 mm x 86 mm x 25 mm |
| Weight: | 350 g |
| Pushbutton: | membrane keypad with 5 pushbuttons |
| Special features: | Cable set and DIN-top-hat rail mounting on request, protection case optional available |
| Scope of features: |
|
Back to the overview | CW-100 Series
