The multibus gateway CANnect supports the network protocol XCP. Via XCPonCAN it is possible to retrieve and write memory contents stored in control units defined in an A2L file. XCP variables are linked in a tabular overview with the source and target signals on other bus systems, such as CAN or LIN, by means of a drag-and-drop operation. The autonomous functioning CANnect is deployed in, amongst others, test benches as well as to integrate new control units in an existing group of interconnected networks.
The CW-305 is a universal cable tester, which thanks to its modular concept can be used to test a wide range of different types of cable. The cable to be tested is connected via variably configurable interface modules. Once the details of a cable have been learnt its configuration is available for a wide variety of tests. In addition to rapid continuity, open circuit and short circuit tests on all lines the CW-305, which is controlled via a touchscreen, is also able to carry out a continuous test to detect cable breaks.
Utilizing the CANnect it is possible to map signals and messages from CAN and LIN buses with one another. The configuration software depicts the mappings clearly arranged and configured in a table. In addition, it is possible to carry out calculations with all signals via a formula editor. User adaptable lookup tables as well as the option to suppress the transmission of messages via controls make it possible to create complex configurations, which are executed following their one-off transfer to the device over the Ethernet.
The CW-401 is designed for a measurement range of ±30 A and a temperature range of -20 °C to +110 °C (-40 °C to +120 °C optional). The use of intelligent analysis algorithms enables the CW-401 to achieve an accuracy of 1% across practically the whole of the measurement range. With a rugged aluminium housing the system consists of a basic unit and a separate, flexibly adjustable measuring head, which allows the user to take measurements in places that are difficult to access. The measured values are outputted via CAN bus and as analog voltage.
The CW-39x series of electronic, high-current relays from CANWAY make possible fast and contract-free switching of max. 70 A direct current loads (140 A pulse load). They replace conventional electromechanical relays; however, they offer the advantages of the integrated semiconductor technology and rugged design in an IP40 rated housing, which include a long service life, rapid switching times as well as a large number of switching cycles. Depending on the relay they are controlled either via a voltage signal or via CAN bus. The CW-392 is also equipped with a current meter integrated in the load circuit, whose measured values can be issued via the CAN bus.
